About This Course

This course is an excellent sequel to the Designing For 3D Printing with Fusion 360 course by Vladimir Mariano.  

We learn how to tackle a multi-part design by taking advantage of using components and other powerful design tools in Fusion 360.  

We will design an LED tea light that functions as a mechanical switch and can be used to light up our other 3d prints.  

It’s an excellent example of using 3d printing for practical and functional designs.

At the end of this course you will have gained the design skills and confidence to take a multi-part design from concept to 3d printed prototype.

We will cover many sketching and modeling concepts and also go through some best practices when designing for 3d printing such tolerances needed for a snug fit when assembling two or more parts.

I will guide you through easy to follow step by step instructions as we create a rewarding model.

What are the requirements?

  • A basic knowledge of Autodesk Fusion 360 is recommended prior to taking this course but not required.
  • See Designing for 3D Printing with Fusion 360 course by Vladimir Mariano if you are a complete beginner.

 

What am I going to get from this course?

  • Design a 3D printable led tea light that turns on and off.
  • Feel comfortable tackling multi-part designs by effectively using components and other design tools in Fusion 360.
  • Take a design from concept to working prototype.

Who is the target audience?

  • Anyone looking to learn how to design for 3D printing or looking to expand their knowledge and improve their skills.
  • Great for students, teachers, hobbyists, inventors, artists, and makers.

 

Our Promise to You

By the end of this course, you will have learned how to design an LED tea light by 3d printing using Fusion 360.

30 Day Money Back Guarantee. If you are unsatisfied for any reason, simply contact us and we’ll give you a full refund. No questions asked.

Get started today and develop your 3d printing skills!

Course Curriculum

Section 1 - Introduction
Introduction 00:00:00
Parts Needed 00:00:00
How It Works 00:00:00
Designing With Components 00:00:00
Configure Z Up 00:00:00
Sketch Constraint Status 00:00:00
Section 2 - The Battery Component
Design The Battery Component 00:00:00
Section 3 - The Top Component
Sketch And Revolve 00:00:00
Sketch On Top Surface 00:00:00
Sketch On Side And Pipe Command 00:00:00
Side Opening 00:00:00
Bumpout 00:00:00
Section 4 - The Bottom Component
Sketch And Revolve 00:00:00
Bottom Bumpouts 00:00:00
Top Sketch And Circular Pattern 00:00:00
Section Analysis 00:00:00
Section 5 - The Cover Component
Sketch And Extrude 00:00:00
Increase Radius 00:00:00
Locking Key 00:00:00
On / Off Indicators 00:00:00
Slot 00:00:00
Section 6 - Amendments
Arrow Indicator To Bottom Component 00:00:00
Top Fillet 00:00:00
Extrusion Width 00:00:00
Section 7 - Assembly
Assemble All The Parts 00:00:00
Template Design © VibeThemes. All rights reserved.

Setup Menus in Admin Panel